Monitoring Safety Relay MSR126.IR Guardmaster, output 2NO safety 6A 24VDC, cv 24VAC/DC, TS35, Allen-Bradley

Guardmaster® Monitoring Safety Relay, Type: MSR126.IR Series, Coil: 24 VAC/VDC, Contact Configuration: Output: 2NO Safety, Contact Rating: 6 A At 24 VDC, Mounting: 35 MM DIN Rail, Resistance: 90 OHM, Enclosure: IP20, IP40, NEMA 1, Withstand Voltage: 2500 V, Size: 2.95 IN Height X 0.88 IN Width X 4.33 IN Depth, Operating Cycles: Mechanical: 2000000, Temperature Rating: -5 To 55 DEG C, Environmental Conditions: Vibration: 0.35 MM At 10 To 55 HZ, Shock: 10 G At 16 MS, 100 Shocks, Reset Type: Monitored Manual

• Item Name: Monitoring Safety Relay

• Type: MSR126.IR Series

• Sub Brand: Guardmaster®

• Coil: 24 VAC/VDC

• Contact Configuration: Output: 2NO Safety

• Contact Rating: 6 A At 24 VDC

• Mounting: 35 MM DIN Rail

• Resistance: 90 OHM

• Enclosure: IP20, IP40, NEMA 1

• Withstand Voltage: 2500 V

• Size: 2.95 IN Height X 0.88 IN Width X 4.33 IN Depth

• Operating Cycles: Mechanical: 2000000

• Temperature Rating: -5 To 55 DEG C

• Environmental Conditions: Vibration: 0.35 MM At 10 To 55 HZ, Shock: 10 G At 16 MS, 100 Shocks

• Reset Type: Monitored Manual

The Allen-Bradley Guardmaster Minotaur MSR126R/T is a safety monitoring relay that provides the very basics for safety control systems in a 22.5 mm package. The MSR126R/T is designed for connection to a single channel safety gate, a single channel e-stop or a light curtain that provides cross fault detection. The MSR126.1R/T is designed for connection to a dual channel safety gate or e-stop, as it performs cross fault detection across the inputs. The MSR126R and MSR126.1R are designed for applications where a monitored manual reset is required. Monitored manual reset requires the use of a momentary normally open switch to activate the outputs. The MSR126T and MSR126.1T are designed for applications where automatic/manual reset is required. The outputs are only two normally open safety-rated outputs. The safety outputs have independent and redundant internal contacts to support the safety function.

• Category 4 per EN 954-1
• Stop category 0
• Single/dual channel operation
• Cross fault monitoring
• E-stop, safety gate or light curtain applications
• Standards: CE marked, cULus listed, c-Tick marked, BG certified
• Applications: For use in SIL3 systems