Safety Relay MSR5T, single-function, input 1NC/2NC, output 3NO safety, 1NC aux., 24VAC/VDC, Allen-Bradley

Safety Relay, Type: MSR5T Series, Single-Function, Coil: 24 VAC/VDC, Contact Configuration: Input: 1NC Or 2NC, Output: 3NO Safety, 1NC Auxiliary, Mounting: 35 MM DIN Rail, Resistance: 200 OHM, Enclosure: IP20, Withstand Voltage: 2500 V, Connection: Screw Terminal, Frequency Rating: 50/60 HZ, Size: 3.23 IN Height X 0.89 IN Width X 3.9 IN Depth, Insulation Voltage: 500 V, Operating Cycles: Mechanical: 2000000, Temperature Rating: -20 To 80 DEG C, Environmental Conditions: Relative Humidity: 90%, Vibration: 0.75 MM (0.3 IN.) Peak At 10 To 55 HZ, Shock: 30 G At 11 MS Half-Sine, Reset Type: Automatic/Manual Or Monitored Manual

• Item Name: Safety Relay

• Type: MSR5T Series, Single-Function

• Coil: 24 VAC/VDC

• Contact Configuration: Input: 1NC Or 2NC, Output: 3NO Safety, 1NC Auxiliary

• Mounting: 35 MM DIN Rail

• Resistance: 200 OHM

• Enclosure: IP20

• Withstand Voltage: 2500 V

• Connection: Screw Terminal

• Frequency Rating: 50/60 HZ

• Size: 3.23 IN Height X 0.89 IN Width X 3.9 IN Depth

• Insulation Voltage: 500 V

• Operating Cycles: Mechanical: 2000000

• Temperature Rating: -20 To 80 DEG C

• Environmental Conditions: Relative Humidity: 90%, Vibration: 0.75 MM (0.3 IN.) Peak At 10 To 55 HZ, Shock: 30 G At 11 MS Half-Sine

• Reset Type: Automatic/Manual Or Monitored Manual

The MSR5T has 1 N.C. single channel input for use with gate interlocks and emergency stop buttons in lower risk applications. The MSR5T has output monitoring that can accommodate an automatic/manual reset function. Automatic/manual reset can use a jumper or can be used to check operation of the contacts. The MSR5T has 3 N.O. safety outputs and 1 N.C. auxiliary output. The safety outputs have independent and redundant internal contacts to help ensure the safety function. The auxiliary contact is a nonsafety output intended to provide an external signal about the status of the safety outputs. The Minotaur power supply converts either 110V AC or 230V AC to 24V DC. It is intended to be used with an MSR5T or a Ferrotek noncontact interlock. When used with the MSR5T, the Minotaur power supply acts like a 110V AC (230V AC) input module allowing a single channel 110V AC (230V AC) circuit to be wired directly into a safety circuit.

• Category 4 per EN 954-1
• Stop category 0
• Single channel input
• Optional 110/230V AC input module
• Standards: CE marked, cULus listed, TUV certified, c-Tick marked, CCC
• Applications: For use in SIL3 systems