RTD Input Module Flex, 8-ch., input ±76.5mV, 150mA 24VDC, 24VDC, TS35?panel mount, Allen-Bradley

Flex™ RTD Input Module, Number Of Channels: 8, Input: Nominal Input: -76.5 To 76.5 MV, Common Mode Input: 10 V, Voltage Rating: Supply: 24 VDC Nominal, 19.2 - 31.2 VDC (Includes 5% AC Ripple), 19.2 - 31.2 VDC For Ambient Temperatures Less Than 40 DEG C, 24 VDC Maximum For Ambient Temperatures 55 DEG C, Current Rating: RTD Excitation Current: 718.36 MICRO-A, Supply Current: 150 MA At 24 VDC, Isolation: Tested At 850 VDC For 1 SEC From Inputs And User Power To Logic Side, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 30 - 1000 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 30 MHZ, Connection Cables: 12 AWG Stranded Copper Wire, Interface: Removable Terminal Block, Mounting: DIN Rail, Panel, Length: 3.7 IN, Width: 2.1 IN, Height: 31.8 IN, Temperature Rating: 32 - 131 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 5 G At 10 - 500 HZ, Shock: 30 G (Operating), 50 G (Non-Operating), Response Time: System Throughput - Normal Mode: 325 MS (1 Channel Scanned), Programmable To 28 MS, 2.6 SEC (8 Channels Scanned), Programmable To 224 MS, Enhanced Mode - Programmable From 56 to 650 MS/Channel - 650 MS (1 Channel Scanned), 2.925 SEC (8 Channels Scanned), Accuracy: Without Calibration, At Low Humidity: Normal Mode: 0.05% Full Scale (Max), Enhanced Mode: 0.01% Full Scale (Typical), Power Dissipation: 3 W At 31.2 VDC, Surge Transient Immunity: Plus/Minus 2 KV line-earth(CM) On Shielded Ports, Keyswitch Position: 3, Indicator: 1 Red/Green Power Status, Resolution: 16 Bits Across 435 OHM, Rejection Ratio: Common Mode Rejection: -120 DB At 60 HZ, -100 DB At 50 HZ With A/D Filter Cut-Off At 10 HZ, Normal Mode Noise Rejection: -60 DB At 60 HZ For A/D Filter Cut-Off At 10 HZ, Bus Rating: 20 MA, Standard/Approvals: C/US UL listed, CSA certified, CE-ATEX, CE-EMC, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, RUS_PAT_APPR, TUV-FS, Application: For in-cabinets

• Item Name: RTD Input Module

• Sub Brand: Flex™

• Number Of Channels: 8

• Input: Nominal Input: -76.5 To 76.5 MV, Common Mode Input: 10 V

• Voltage Rating: Supply: 24 VDC Nominal, 19.2 - 31.2 VDC (Includes 5% AC Ripple), 19.2 - 31.2 VDC For Ambient Temperatures Less Than 40 DEG C, 24 VDC Maximum For Ambient Temperatures 55 DEG C

• Current Rating: RTD Excitation Current: 718.36 MICRO-A, Supply Current: 150 MA At 24 VDC

• Isolation: Tested At 850 VDC For 1 SEC From Inputs And User Power To Logic Side

• Enclosure: Open Type

• Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 30 - 1000 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 30 MHZ

• Connection Cables: 12 AWG Stranded Copper Wire

• Interface: Removable Terminal Block

• Mounting: DIN Rail, Panel

• Length: 3.7 IN

• Width: 2.1 IN

• Height: 31.8 IN

• Temperature Rating: 32 - 131 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 5 G At 10 - 500 HZ, Shock: 30 G (Operating), 50 G (Non-Operating)

• Response Time: System Throughput - Normal Mode: 325 MS (1 Channel Scanned), Programmable To 28 MS, 2.6 SEC (8 Channels Scanned), Programmable To 224 MS, Enhanced Mode - Programmable From 56 to 650 MS/Channel - 650 MS (1 Channel Scanned), 2.925 SEC (8 Channels Scanned)

• Accuracy: Without Calibration, At Low Humidity: Normal Mode: 0.05% Full Scale (Max), Enhanced Mode: 0.01% Full Scale (Typical)

• Power Dissipation: 3 W At 31.2 VDC

• Indicator: 1 Red/Green Power Status

• Surge Transient Immunity: Plus/Minus 2 KV line-earth(CM) On Shielded Ports

• Resolution: 16 Bits Across 435 OHM

• Keyswitch Position: 3

• Bus Rating: 20 MA

• Rejection Ratio: Common Mode Rejection: -120 DB At 60 HZ, -100 DB At 50 HZ With A/D Filter Cut-Off At 10 HZ, Normal Mode Noise Rejection: -60 DB At 60 HZ For A/D Filter Cut-Off At 10 HZ

• Individually configurable channels allow the module to be used with a variety of sensors
• Selectable input filters on many modules allow to select from several different filter frequencies for each channel that best meets the performance needs of application. Lower filter settings provide greater noise rejection and resolution, higher filter settings provide faster performance
• Single-ended or differential inputs depending on module, analog modules have single-ended inputs while isolated analog and temperature modules have differential inputs, single-ended voltage sensors reduce costs, differential inputs are typically more noise immune
• Standards: C/US UL listed, CSA certified, CE-ATEX, CE-EMC, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, RUS_PAT_APPR, TUV-FS
• Applications: For in-cabinets