Synchronous Serial Interface Encoder Module Point I/O, 1-ch., input 5..10VDC, 0.75A, RS422, 24VDC, TS35, Allen-Bradley

Point I/O™ Synchronous Serial Interface Encoder Module, Number Of Channels: 1, Input: On-State Voltage: 5 - 10 VDC, On-State Current: 2 - 5 MA, 4 MA Nominal, Off-State Current: 1.2 MA, Current Rating: 0.75 A, Isolation: 50 V (Continuous), Enclosure: Open Type, Connection Cables: 22 - 14 AWG Solid/Stranded Copper Wire, UL CM/AWM 2464/CSA Type CMG FT4, Interface: RS-422, Mounting: DIN Rail, Length: 0.47 IN, Width: 2.21 IN, Height: 2.97 IN, Temperature Rating: -20 To 55 DEG C, Environmental Conditions: 5 - 95% Non-Condensing Relative Humidity, Shock: 30 G Operating, 50 G Nonoperating, Vibration: 5 G At 10 - 500 HZ, Response Time: Delay: 16 MS - 64 MS, Position Forming Time: Greater Than Or Equal To 0.5 MS; Input Filter: 0.5 MS Nominal, Power Dissipation: 0.94 W, Bus Rating: 100 MA, Supply: Nominal - 24 VDC, 10 - 28.8 VDC, Keyswitch Position: 2, Standard/Approvals: CE-ATEX marked, CE-EMC marked, C-Tick certified, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, MARINE-LR certified, ROSTECHNADZOR certified, UL-CA listed, UL-CA_HAZ listed, UL-US listed, UL-US_HAZ listed

• Item Name: Synchronous Serial Interface Encoder Module

• Sub Brand: Point I/O™

• Number Of Channels: 1

• Input: On-State Voltage: 5 - 10 VDC, On-State Current: 2 - 5 MA, 4 MA Nominal, Off-State Current: 1.2 MA

• Current Rating: 0.75 A

• Isolation: 50 V (Continuous)

• Enclosure: Open Type

• Connection Cables: 22 - 14 AWG Solid/Stranded Copper Wire, UL CM/AWM 2464/CSA Type CMG FT4

• Interface: RS-422

• Mounting: DIN Rail

• Length: 0.47 IN

• Width: 2.21 IN

• Height: 2.97 IN

• Temperature Rating: -20 To 55 DEG C

• Environmental Conditions: 5 - 95% Non-Condensing Relative Humidity, Shock: 30 G Operating, 50 G Nonoperating, Vibration: 5 G At 10 - 500 HZ

• Response Time: Delay: 16 MS - 64 MS, Position Forming Time: Greater Than Or Equal To 0.5 MS; Input Filter: 0.5 MS Nominal

• Power Dissipation: 0.94 W

• Keyswitch Position: 2

• Bus Rating: 100 MA, Supply: Nominal - 24 VDC, 10 - 28.8 VDC

Bulletin 1734 POINT I/O™ is ideal for applications requiring flexibility and low cost of ownership. Granularity of one to eight points lets you buy only the I/O you need. The compact design makes installation easier in limited panel space. The family includes POINT Guard I/O™ safety-rated I/O modules that can be used side-by-side in a standard POINT I/O system

• Cost savings modular design requires less enclosure space
• Up to 504 channels on a single network interface
• Removable terminations accelerate commissioning
• Remove and insert under power reduces maintenance time
• Local autonomous control
• Fast, simple configuration and integration
• Full Add-on-Profiles in RSLogix 5000, no other software is needed
• Channel-level diagnostics
• Greater flexibility
• Local control
• Controlled by a single GuardLogix controller
• Any absolute encoder supporting standard SSI protocol including linear, rotary and optical distance measuring devices
• Most-Significant Bit Aligned data format
• Gray or binary code capable with gray to binary conversion increasing or decreasing SSI count indication
• Cable length depends on desired SSI data rate
• Standards: CE-ATEX marked, CE-EMC marked, C-Tick certified, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-KRS certified, MARINE-LR certified, ROSTECHNADZOR certified, UL-CA listed, UL-CA_HAZ listed, UL-US listed, UL-US_HAZ listed